contact

8 Comments

  1. 返信
    Tom M Petersen 2011/2/28 月曜日

    Hey there.
    I want to know if you have a version of iosc that works with arduinos newest version 022 and som code / sketchs to try out your system.

    It seem very usable…Thanks in advance

    Best regards
    Tom M Petersen

  2. 返信
    Ismael Martínez Pérez 2011/10/5 水曜日

    Hi!

    Could you bring me the data of the author of this page, for put him as reference in a project that i am working.

    Thanks in Advance.
    Greetings from Mexico

  3. 返信
    venya 2012/9/12 水曜日

    hey

    i have been using your ardosc library for a while now and think it is amazing, am hoping to find a way to make it work with the wifi shield so that i could send osc data wirelessly.. but i just cannot get it to compile correctly, is there a way around this? is this an update you might be bringing out?

  4. 返信
    ro2 2012/10/7 日曜日

    hello great job, but i have a problem to use it
    I want read 20 digital pin and send it over OSC ethernet
    i try this
    #include
    #include
    #include

    byte myMac[] = { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED };
    byte myIp[] = { 192, 168, 127, 11 }; //adresse du module
    int destPort=12001;//port de communication idem sur max et module
    byte destIp[] = { 192, 168, 127, 10 };//adresse de l’ordinateur

    long int inputNumber = 0;
    long int inputValue = 0;
    OSCClient client;

    //create new osc message
    OSCMessage global_mes;

    void setup(){

    Ethernet.begin(myMac ,myIp);
    // initialize the pushbutton pin as an input:

    pinMode(2, INPUT);

    }

    void loop(){
    //////etat des entres numerique//////
    inputNumber = 2;
    inputValue = digitalRead(inputNumber);//etat de l’entrée 2
    global_mes.setAddress(destIp,destPort);
    global_mes.beginMessage(“/ard/digi1″);
    global_mes.addArgInt32(inputValue);
    client.send(&global_mes);
    global_mes.flush(); //object data clear

    delay(50);

    }

    that run well but only for one pin can you tell me a way for more

    tahnk you

  5. 返信
    Fischer 2014/3/25 火曜日

    Hi

    Is it posible to get a *.HEX file from the Petitmidi.
    I have try the Main file’s but will not work.

    Greetings from Holland
    Winfried

  6. 返信
    ???Ô©`?Ù?ë?È 2014/6/25 水曜日

    ?ホック開閉小銭入れ

  7. 返信
    Taro Maeda 2014/9/18 木曜日

    Hi, Recotana!

    I have applied iOS8 onto my iPhone5, and found the application CopyByEar does not work properly now. The portrait display is always shown, but the landscape display is never shown.

    As you know, the display of CopyByEar is designed horizontally, therefore, only the left side of it is shown, after iOS8 is applied onto my iPhone5.

    Please do something for me so that I can use it properly as before. I like this application.

    Regards,

  8. 返信
    G1 2015/11/15 日曜日

    Hi there, I just came across with your website and thought it will be useful to introduce your project on our website.
    Our company’s partner site: wiznetmuseum.com promotes an open source project like yours that has used our wiznet chip and send off a sample product if requested.You mind if I post up your project on our site?
    Let me know.
    Thank you.

コメントを残す

メールアドレスが公開されることはありません。

次のHTML タグと属性が使えます: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>